|
Lisle 76000 Oil Filter Crusher
American
made.... Converts oil filter into scrap, and oil into recyclable product
in seconds. Operates on shop air from 90 to 150 psi. Crusher cycles in
25 to 30 seconds depending on air pressure and filter size. Easily mounts
on the wall. Crushes filters up to 5" in diameter and 8" in height. Removes
up to 95% of free flowing oil. Accessories: Automatic Valve Retrofit Kit, Part #76520. With this kit you can convert from manual to automatic operation. Allows operator to push start button and crush filter without holding the button down.
Filter Spacer, Part #76390. The filter spacer is used to reduce cycle time. Spacer fits over ram center post to shorten travel time of the ram. Lifetime warranty.
• Weight - 70 lbs.
DISCOUNT PRICE $999
 |
LARGER IMAGE
 |
|
|
OTC 1821 10 Ton Capacity Oil Filter Crusher
• Crushes up to four automotive filters at one time, in just 20 seconds
• 100% air operation eliminates electrical connections
• The generous size crushing chamber (9" high) easily accommodates the largest automotive spin-on filters on the market
• Weight - 245 lbs.
FREE SHIPPING
NO SHIPPING CHARGE AT CHECKOUT
DISCOUNT PRICE $1999
|
LARGER IMAGE
|
|
|
OTC 1875 25 Ton Capacity Oil Filter Crusher
• Crushes most automotive and light truck filters up to 6" long, plus the Ford 6.9L and 7.3L diesel engine filters.
• Automatic cycle feature: load the filter, push a button, and walk away.
• Includes air/hydraulic pump that works on standard shop air.
• No electrical components needed.
• Removes 95% of the residual oil from a pre-drained filter, and crushes filter to 1/6 of original size.
• Made in the U.S.A., covered by Lifetime Marathon Warranty®.
• Weight - 104 lbs.
FREE SHIPPING
NO SHIPPING CHARGE AT CHECKOUT
DISCOUNT PRICE $2449
|
LARGER IMAGE
|
|
|
OTC 1877 HD 25 Ton Capacity Oil Filter Crusher
• Handles the big filters (up to 6" dia. and 12-1/2" long)found in trucks, construction equipment, farm implements,etc
• May also be used for automotive and light truck filters
• It does it all! Crushes filters to 1/4 of original size, removing up to 95% of filter's oil capacity
• Automatic cycle feature: load the filter, push a button, and walk away
• Air/hydraulic pump works on standard shop air (requires 9CFM at 100 psi)
• Special valving returns ram automatically at the end of each cycle
• No electrical connections needed
• Built-in floor stand (completely assembled)
• Whole unit requires just 5 square feet of floor space
• Covered by OTC Lifetime Marathon Warranty®
• Weight - 242 lbs.
FREE SHIPPING
NO SHIPPING CHARGE AT CHECKOUT
DISCOUNT PRICE $3149
|
LARGER IMAGE
|
|
|
OTC 1896 HS 25 Ton Capacity Oil Filter Crusher
• Automotive and heavy-duty filters up to 15-1/4" long and 6" dia. are crushed in approximately 8 to 16 seconds. Filters are reduced to 20% of original size, with 95% of residual oil removed
• Automatic cycle feature lets you load the filter, push a button, and walk away
• Powered by 2 hp electric/hydraulic pump, 230 volt, 20 amp, 60 cycle, single phase, 3,450 rpm. Has 2-gallon reservoir
• Bult-in, heavy-duty floor stand with leveling pads is designed to accept a 30-gallon drum for oil drainage
• Comes assembled
• Made in U.S.A. and dovered by Lifetime Marathon Warranty®
• Weight - 400 lbs.
FREE SHIPPING
NO SHIPPING CHARGE AT CHECKOUT
DISCOUNT PRICE $4999
|
LARGER IMAGE
|
|
|
